Cisco 4000 Series - Page 6

Contents
vi
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Default Routes 4-13
Default Network 4-13
Gateway of Last Resort 4-14
Configuration Examples 4-15
Configure Virtual Terminal Lines for Remote Console Access 4-16
Configuration Examples 4-17
Configure the Auxiliary Line 4-18
Verify Network Connectivity 4-19
Save Your Device Configuration 4-20
Save Backup Copies of Configuration and System Image 4-20
Configuration Examples 4-21
Verify Initial Configuration on Cisco 4000 Series ISRs 4-23
CHAPTER 5 Install and Upgrade Internal Modules and FRUs 5-1
Safety Warnings 5-2
Modules Supported 5-4
Access Internal Modules 5-4
Remove and Replace Chassis Cover 5-4
Remove Cover from Cisco 4400 or 4200 ISR 5-4
Remove Cover from Cisco 4300 ISR 5-5
Replace Cover on Cisco 4400 or 4200 ISR 5-5
Replace Cover on Cisco 4300 ISR 5-6
Locate Internal and External Slots 5-6
Locate Internal and External Slots for Modules on Cisco 4461 ISR 5-7
Locate NEBS Module 5-8
Locate Internal and External Slots for Modules on Cisco 4451 ISR 5-8
Locate Internal and External Slots for Modules on Cisco 4351 ISR 5-10
Locate Internal and External Slots for Modules on Cisco 4331 ISR 5-11
5-11
Overview of the SSD Carrier Card NIM (NIM-SSD) 5-11
Overview 5-12
LEDs on NIM-SSD 5-13
Solid State Drives 5-15
Install SSD Drives into the NIM Carrier Card 5-17
Remove SSD Drives from the NIM-SSD 5-18
Overview of NIM-HDD Card 5-20
Cisco NIM-HDD LEDs 5-22
Remove and Replace Cisco NIM-SSD or NIM-HDD 5-22
Remove NIM-SSD or NIM-HDD 5-24