Cisco ASR 9000 Series Configuration Guide

SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
bgp redistribute-internal
4.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Specifies the autonomous system number and enters the
BGP configuration mode, allowing you to configure the
BGP routing process.
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 120
Step 2
Allows the redistribution of iBGP routes into an IGP,
such as IS-IS or OSPF.
bgp redistribute-internal
Example:
RP/0/RSP0/CPU0:router(config-bgp)# bgp
redistribute-internal
Step 3
commit
Step 4
Redistributing Prefixes into Multiprotocol BGP
Perform this task to redistribute prefixes from another protocol into multiprotocol BGP.
Redistribution is the process of injecting prefixes from one routing protocol into another routing protocol.
This task shows how to inject prefixes from another routing protocol into multiprotocol BGP. Specifically,
prefixes that are redistributed into multiprotocol BGP using the redistribute command are injected into the
unicast database, the multicast database, or both.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
88 OL-30423-03
Implementing BGP
Redistributing Prefixes into Multiprotocol BGP

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English