EasyManuals Logo
Home>Cisco>Network Router>ASR 9000 Series

Cisco ASR 9000 Series Configuration Guide

Cisco ASR 9000 Series
604 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #263 background imageLoading...
Page #263 background image
BFD Peers on Routers Running Cisco IOS and Cisco IOS XR Software: Example
The following example shows how to configure BFD on a router interface on Router 1 that is running Cisco
IOS software, and use the bfd neighbor command to designate the IP address 192.0.2.1 of an interface as its
BFD peer on Router 2. Router 2 is running Cisco IOS XR software and uses the router static command and
address-family ipv4 unicast command to designate the path back to Router 1’s interface with IP address
192.0.2.2.
Router 1 (Cisco IOS software)
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet8/1/0
RP/0/RSP0/CPU0:router(config-if)#description to-TestBed1 G0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#ip address 192.0.2.2 255.255.255.0
RP/0/RSP0/CPU0:router(config-if)#bfd interval 100 min_rx 100 multiplier 3
RP/0/RSP0/CPU0:router(config-if)#bfd neighbor 192.0.2.1
Router 2 (Cisco IOS XR Software)
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)#router static
RP/0/RSP0/CPU0:router(config-static)#address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-static-afi)#10.10.10.10/32 192.0.2.2 bfd fast-detect
RP/0/RSP0/CPU0:router(config-static-afi)#exit
RP/0/RSP0/CPU0:router(config-static)#exit
RP/0/RSP0/CPU0:router(config)#interface GigabitEthernet0/0/0/0
RP/0/RSP0/CPU0:router(config-if)#ipv4 address 192.0.2.1 255.255.255.0
Configuring BFD IPv6 Multihop: Examples
Configuring BFD IPv6 Multihop for eBGP Neighbors: Example
This example shows how to configure BFD IPv6 Multihop for eBGP Neighbors:
bfd
multipath include location 0//CPU0
!
router bgp 65001
neighbor 21:1:1:1:1:1:1:2
bfd fast-detect
ebgp-multiphop 255
Configuring BFD IPv6 Multihop for iBGP Neighbors: Example
This example shows how configure BFD IPv6 Multihop for iBGP Neighbors:
bfd
multipath include location 0/7/CPU0
!
router bgp 65001
neighbor 21:1:1:1:1:1:1:2
bfd fast-detect
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 235
Implementing BFD
BFD Peers on Routers Running Cisco IOS and Cisco IOS XR Software: Example

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
BrandCisco
ModelASR 9000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals