Cisco ASR 9000 Series Configuration Guide

SUMMARY STEPS
1.
configure
2.
router ospf 100
3.
track-external-routes
4.
track-summary-routes
5.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enables OSPF routing for the specified
routing process and places the router in
router configuration mode.
router ospf 100
Example:
RP/0/RSP0/CPU0:router(config)#router ospf 100
Step 2
Enables tracking of external
(Type-3/5/7) LSAs prefix monitoring.
track-external-routes
Example:
RP/0/RSP0/CPU0:router(config-ospf-af-rcmd)#track-external-routes
Step 3
Enables tracking of summary
(inter-area) routes monitoring
track-summary-routes
Example:
RP/0/RSP0/CPU0:router(config-ospf-af-rcmd)#track-summary-routes
Step 4
commit
Step 5
Enabling RCMD Monitoring for IS-IS Prefixes: Example
This example shows how to monitor RCMD prefix monitoring for individual IS-IS prefixes:
ipv6 prefix-list isis_monitor
10 permit 2001:db8::/32
!
router isis isp
address-family ipv6 unicast
monitor-convergence
prefix-list isis_monitor
Enabling RCMD Monitoring for OSPF Prefixes: Example
This example shows how to enable RCMD monitoring for individual OSPF prefixes:
ipv6 prefix-list ospf_monitor
10 permit 2001:db8::/32
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
574 OL-30423-03
Implementing RCMD
Enabling RCMD Monitoring for IS-IS Prefixes: Example

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model