EasyManuals Logo

Cisco ASR 9000 Series Configuration Guide

Cisco ASR 9000 Series
604 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #257 background imageLoading...
Page #257 background image
PurposeCommand or Action
debounce - count of consecutive BFD probes whose status
should match before BFD notifies OT
debouncedebounce
Example:
RP/0/RSP0/CPU0:router(config-if)# debounce 10
Step 4
if_name - interface name on the source to be used by
BFD to check the remote BFD status.
interface if-name
Example:
RP/0/RSP0/CPU0:router(config-track-line-prot)#
interface atm 0/2/0/0.1
Step 5
dest_addr - IPV4 address of the remote BFD entity being
tracked.
destaddress dest_addr
Example:
RP/0/RSP0/CPU0:router(config-if)#destaddress
1.2.3.4
Step 6
commit
Step 7
Configuration Examples for Configuring BFD
BFD Over BGP: Example
The following example shows how to configure BFD between autonomous system 65000 and neighbor
192.168.70.24:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)#router bgp 65000
RP/0/RSP0/CPU0:router(config-bgp)#bfd multiplier 2
RP/0/RSP0/CPU0:router(config-bgp)#bfd minimum-interval 20
RP/0/RSP0/CPU0:router(config-bgp)#neighbor 192.168.70.24
RP/0/RSP0/CPU0:router(config-bgp-nbr)#remote-as 2
RP/0/RSP0/CPU0:router(config-bgp-nbr)#bfd fast-detect
RP/0/RSP0/CPU0:router(config-bgp-nbr)#commit
RP/0/RSP0/CPU0:router(config-bgp-nbr)#end
RP/0/RSP0/CPU0:router#show run router bgp
BFD Over OSPF: Examples
The following example shows how to enable BFD for OSPF on a Gigabit Ethernet interface:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)#router ospf 0
RP/0/RSP0/CPU0:router(config-ospf)#area 0
RP/0/RSP0/CPU0:router(config-ospf-ar)#interface gigabitEthernet 0/3/0/1
RP/0/RSP0/CPU0:router(config-ospf-ar-if)#bfd fast-detect
RP/0/RSP0/CPU0:router(config-ospf-ar-if)#commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 229
Implementing BFD
Configuration Examples for Configuring BFD

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals