Cisco ASR 9000 Series Configuration Guide

CHAPTER 4
Implementing EIGRP
The Enhanced Interior Gateway Routing Protocol (EIGRP) is an enhanced version of IGRP developed by
Cisco. This module describes the concepts and tasks you need to implement basic EIGRP configuration
using Cisco IOS XR software. EIGRP uses distance vector routing technology, which specifies that a router
need not know all the router and link relationships for the entire network. Each router advertises destinations
with a corresponding distance and upon receiving routes, adjusts the distance and propagates the information
to neighboring routes.
For EIGRP configuration information related to the following features, see the Related Documents, on page
271 section of this module.
•
Multiprotocol Label Switching (MPLS) Layer 3 Virtual Private Network (VPN)
•
Site of Origin (SoO) Support
For more information about EIGRP on the Cisco IOS XR software and complete descriptions of the EIGRP
commands listed in this module, see the EIGRP Commands chapter in the Cisco ASR 9000 Series
Aggregation Services Router Routing Command Reference. To locate documentation for other commands
that might appear while executing a configuration task, search online in the Cisco IOS XR software master
command index.
Note
Feature History for Implementing EIGRP
ModificationRelease
This feature was introduced.Release 3.7.2
Wide Metric Support feature was addedRelease 4.3.0
Support for Site of origin (SoO) attribute was addedRelease 6.0.1
•
Prerequisites for Implementing EIGRP, page 240
•
Restrictions for Implementing EIGRP , page 240
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 239

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English