Cisco ASR 9000 Series Configuration Guide

PurposeCommand or Action
Displays BGP program information.show placement program bgp
Step 7
Example:
RP/0/RSP0/CPU0:router# show placement
program bgp
• If a program is shown as having ‘rejected locations’ (for example,
locations where program cannot be placed), the locations in
question can be viewed using the show placement program bgp
command.
•
If a program has been placed but not started, the amount of
elapsed time since the program was placed is displayed in the
Waiting to start column.
Displays bRIB program information.show placement program brib
Step 8
Example:
RP/0/RSP0/CPU0:router# show placement
program brib
• If a program is shown as having ‘rejected locations’ (for example,
locations where program cannot be placed), the locations in
question can be viewed using the show placement program bgp
command.
•
If a program has been placed but not started, the amount of
elapsed time since the program was placed is displayed in the
Waiting to start column.
Monitoring BGP Update Groups
This task displays information related to the processing of BGP update groups.
SUMMARY STEPS
1.
show bgp [ ipv4 { unicast | multicast | all | tunnel } | ipv6 { unicast | all } | all { unicast |
multicast | all | tunnel } | vpnv4 unicast | vrf { vrf-name | all } [ ipv4 unicast ] update-group
[ neighbor ip-address | process-id.index [ summary | performance-statistics ]]
DETAILED STEPS
PurposeCommand or Action
Displays information about BGP update groups.show bgp [ ipv4 { unicast | multicast | all |
tunnel } | ipv6 { unicast | all } | all { unicast |
Step 1
•
The ip-address argument displays the update groups to which that
neighbor belongs.
multicast | all | tunnel } | vpnv4 unicast | vrf
{ vrf-name | all } [ ipv4 unicast ] update-group
[ neighbor ip-address | process-id.index [
summary | performance-statistics ]]
•
The process-id.index argument selects a particular update group
to display and is specified as follows: process ID (dot) index.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
134 OL-30423-03
Implementing BGP
Monitoring BGP Update Groups

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model