Cisco ASR 9000 Series Configuration Guide

DETAILED STEPS
PurposeCommand or Action
Runs on-demand Route Consistency
Checker (RCC) or Label Consistency
Checker (LCC).
Use one of these commands.
Step 1
•
show rcc {ipv4 | ipv6} unicast [all] [prefix/mask] [vrf vrf-name]
•
show lcc {ipv4 | ipv6} unicast [all] [prefix/mask] [vrf vrf-name]
Example:
RP/0/RSP0/CPU0:router#show rcc ipv6 unicast 2001:DB8::/32 vrf vrf_1
Or
RP/0/RSP0/CPU0:router#show lcc ipv6 unicast 2001:DB8::/32 vrf vrf_1
Clears the log of previous scans.Use one of these commands.
Step 2
•
clear rcc {ipv4 | ipv6} unicast [all] [prefix/mask] [vrf vrf-name] log
•
clear lcc {ipv4 | ipv6} unicast [all] [prefix/mask] [vrf vrf-name] log
Example:
RP/0/RSP0/CPU0:router#clear rcc ipv6 unicast log
Or
RP/0/RSP0/CPU0:router#show lcc ipv6 unicast log
Enabling RCC and LCC Background Scan
Perform this task to run a background scan for Route Consistency Checker (RCC) and Label Consistency
Checker (LCC).
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
434 OL-30423-03
Implementing and Monitoring RIB
Enabling RCC and LCC Background Scan

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model