Cisco ASR 9000 Series Configuration Guide

Additional References
Related Documents
Document TitleRelated Topic
RIB Commands on Cisco IOS XR Software in
Cisco ASR 9000 Series Aggregation Services Router
Routing Command Reference
Routing Information Base commands: complete
command syntax, command modes, command history,
defaults, usage guidelines, and examples
Standards and RFCs
TitleStandard/RFC
IP Fast Reroute Framework, by M. Shand and S.
Bryant
Draft-ietf-rtgwg-ipfrr-framework-06.txt
A Framework for Loop-free Convergence, by M.
Shand and S. Bryant
Draft-ietf-rtgwg-lf-conv-frmwk-00.txt
—
No new or modified RFCs are supported by this
feature, and support for existing RFCs has not been
modified by this feature.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
—
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
440 OL-30423-03
Implementing and Monitoring RIB
Additional References

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model