Cisco ASR 9000 Series Configuration Guide

Disabling Selective VRF Download
Selective VRF Download is disabled by default. However, if the SVD is enabled, perform these tasks to
disable the functionality.
SUMMARY STEPS
1.
admin
2.
configure
3.
no svd platform enable
4.
commit
5.
show svd state
6.
admin
7.
reload location all
8.
exit
9.
show svd role
DETAILED STEPS
PurposeCommand or Action
Enters administration EXEC mode.admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 1
Enters Administrative configuration
mode.
configure
Example:
RP/0/RSP0/CPU0:router(admin)#configure
Step 2
Disables Selective VRF Download.no svd platform enable
Example:
RP/0/RSP0/CPU0:PE51_ASR-9010(admin-config)#no svd platform enable
Step 3
commit
Step 4
Displays Selective VRF download
feature state information.
show svd state
Example:
RP/0/RSP0/CPU0:router#show svd state
Selective VRF Download (SVD) Feature State:
Step 5
SVD Configuration State Unsupported
SVD Operational State Unsupported
Enters administrator mode.admin
Example:
RP/0/RSP0/CPU0:router#admin
Step 6
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
154 OL-30423-03
Implementing BGP
Disabling Selective VRF Download

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model