Cisco ASR 9000 Series

PurposeCommand or Action
commit
Step 4
Displays Selective VRF download
feature state information.
show svd state
Example:
RP/0/RSP0/CPU0:router#show svd state
Selective VRF Download (SVD) Feature State:
Step 5
SVD Configuration State Enabled
SVD Operational State Enabled
Enters administrator mode.admin
Example:
RP/0/RSP0/CPU0:router#admin
Step 6
Reloads the chassis.reload location all
Example:
RP/0/RSP0/CPU0:router(admin)#reload loc all
Tue Feb 12 07:51:25.279 UTC
Step 7
Preparing system for backup. This may take a few minutes especially
for large
configurations.
Status report: node0_RSP0_CPU0: START TO BACKUP
Status report: node0_RSP0_CPU0: BACKUP HAS COMPLETED
SUCCESSFULLY
[Done]
Proceed with reload? [confirm]RP/0/RSP0/CPU0::This node received
reload
Exits administrator mode and enters
EXEC mode.
exit
Example:
RP/0/RSP0/CPU0:router(admin)#exit
Step 8
Verifies if selective VRF download
is active by confirming that svd roles
show svd role
Example:
RP/0/RSP0/CPU0:router#show svd role
Tue Feb 12 07:50:26.908 UTC
Step 9
are "customer facing" for the line
cards that have VRF interfaces on
them.
Codes: (C) : user Configured role
Node Name IPv4 Role IPv6 Role
--------------------------------------------------------------------
0/RSP0/CPU0 Standard Standard
0/0/CPU0 Customer Facing Not Interested
0/1/CPU0 Customer Facing Not Interested
What to Do Next
After enabling SVD using the svd platform enable command, do not use the selective-vrf-download disable
to turn off SVD.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 153
Implementing BGP
Enabling Selective VRF Download