Cisco ASR 9000 Series Configuration Guide

PurposeCommand or Action
Displays tag information. Verify that all tags are present
in the RIB.
show isis [ ipv4 | ipv6 | afi-all ] [ unicast | safi-all ]
route [ detail ]
Example:
RP/0/RSP0/CPU0:router(config-isis-if-af)# show
isis ipv4 route detail
Step 10
Setting the Priority for Adding Prefixes to the RIB
This optional task describes how to set the priority (order) for which specified prefixes are added to the RIB.
The prefixes can be chosen using an access list (ACL), prefix list, or by matching a tag value.
SUMMARY STEPS
1.
configure
2.
router isis instance-id
3.
address-family { ipv4 | ipv6 } [ unicast ]
4.
metric-style wide [ transition ] [ level { 1 | 2 }]
5.
spf prefix-priority [ level { 1 | 2 }] { critical | high | medium } { access-list-name | tag tag }
6.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enables IS-IS routing for the specified routing process,
and places the router in router configuration mode. In
this example, the IS-IS instance is called isp.
router isis instance-id
Example:
RP/0/RSP0/CPU0:router(config)# router isis isp
Step 2
Specifies the IPv4 or IPv6 address family, and enters
router address family configuration mode.
address-family { ipv4 | ipv6 } [ unicast ]
Example:
RP/0/RSP0/CPU0:router(config-isis)# address-family
ipv4 unicast
Step 3
Configures a router to generate and accept only
wide-link metrics in the Level 1 area.
metric-style wide [ transition ] [ level { 1 | 2 }]
Example:
RP/0/RSP0/CPU0:router(config-isis-af)# metric-style
wide level 1
Step 4
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 317
Implementing IS-IS
Setting the Priority for Adding Prefixes to the RIB

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English