Name: Cisco ASR 9000 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Import Routes from non-default-VRF to default-VRF

vrf vrf_1

address-family ipv6 unicast

export to default-vrf route-policy rpl_dynamic_route_export

end

Resilient Per-CE Label Allocation Mode Configuration: Example

Configuring Resilient Per-CE Label Allocation Mode Under VRF Address Family: Example

This example shows how to configure resilient per-ce label allocation mode under VRF address family:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# router bgp 666

RP/0/RSP0/CPU0:router(config-bgp)# vrf vrf-pe

RP/0/RSP0/CPU0:router(config-bgp-vrf)# address-family ipv4 unicast

RP/0/RSP0/CPU0:router(config-bgp-vrf-af)# label mode per-ce

RP/0/RSP0/CPU0:router(config-bgp-vrf-af)# end

Configuring Resilient Per-CE Label Allocation Mode Using a Route-Policy: Example

This example shows how to configure resilient per-ce label allocation mode using a route-policy:

RP/0/RSP0/CPU0:router# configure

RP/0/RSP0/CPU0:router(config)# route-policy route1

RP/0/RSP0/CPU0:router(config-rpl)# set label mode per-ce

RP/0/RSP0/CPU0:router(config-rpl)# end

Where to Go Next

For detailed information about BGP commands, see Cisco ASR 9000 Series Aggregation Services Router

Routing Command Reference

Additional References

The following sections provide references related to implementing BGP.

Cisco ASR 9000 Series Configuration Guide

Other manuals for Cisco ASR 9000 Series