Cisco ASR 9000 Series

SetMatchAttributeAttach Point
table-policy
—
in
is-local
length
neighbor-is
originates-from
passes-through
unique-length
as-path
—
is, ge, le, eqas-path-unique-length
—
is-empty
matches-any
matches-every
community
—
is, ge, le, eqlocal-preference
—
indestination
—
is, eg, ge, lemed
—
innext-hop
—
isorigin
set
—
rib-metric
—
insource
set
—
tag
set
—
traffic-index
Some BGP route attributes are inaccessible from some BGP attach points for various reasons. For example,
the set med igp-cost only command makes sense when there is a configured igp-cost to provide a source
value.
Default-Information Originate
The default-information originate attach point allows the user to conditionally inject the default route 0.0.0.0/0
into the OSPF link-state database, which is done by evaluating the attached policy. If any routes in the local
RIB pass the policy, then the default route is inserted into the link-state database.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 515
Implementing Routing Policy
Attach Points