EasyManuals Logo

Cisco ASR 9000 Series Configuration Guide

Cisco ASR 9000 Series
604 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #397 background imageLoading...
Page #397 background image
PurposeCommand or Action
Enables Type 1 (plain text) authentication that provides
no security.
authentication [ message-digest | null ]
Example:
RP/0/RSP0/CPU0:router(config-ospf-ar)# authentication
Step 11
•
The example specifies plain text authentication
(by not specifying a keyword). Use the
authentication-key command in interface
configuration mode to specify the plain text
password.
Enters interface configuration mode and associates one
or more interfaces to the nonbackbone area 1 specified
in Step 7.
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf-ar)# interface
GigabitEthernet 0/1/0/0
Step 12
•
All interfaces configured inherit the authentication
parameter values configured for area 1.
—
Repeat Step 12 for each interface that must communicate, using
the same authentication.
Step 13
Enters interface configuration mode and associates one
or more interfaces to a different authentication type.
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf-ar)# interface
GigabitEthernet 0/3/0/0
Step 14
Specifies no authentication on GigabitEthernet interface
0/3/0/0, overriding the plain text authentication
specified for area 1.
authentication [ message-digest | null ]
Example:
RP/0/RSP0/CPU0:router(config-ospf-ar-if)#
authentication null
Step 15
•
By default, all of the interfaces configured in the
same area inherit the same authentication
parameter values of the area.
commit
Step 16
Controlling the Frequency That the Same LSA Is Originated or Accepted for
OSPF
This task explains how to tune the convergence time of OSPF routes in the routing table when many LSAs
need to be flooded in a very short time interval.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 369
Implementing OSPF
Controlling the Frequency That the Same LSA Is Originated or Accepted for OSPF

Table of Contents

Other manuals for Cisco ASR 9000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000 Series and is the answer not in the manual?

Cisco ASR 9000 Series Specifications

General IconGeneral
SeriesASR 9000
CategoryNetwork Router
Modular DesignYes
RedundancyYes (Hardware and Software)
Operating SystemCisco IOS XR
Interfaces/Ports10G, 40G, 100G, 400G Ethernet
Expansion SlotsVaries by model
Routing ProtocolBGP, OSPF, IS-IS, EIGRP
ManagementCLI, SNMP, NETCONF
Power SupplyRedundant
Port DensityVaries by model
Power Supply OptionsAC, DC
MemoryVaries by model
StorageVaries by model
DimensionsVaries by model
WeightVaries by model

Related product manuals