Cisco ASR 9000 Series

SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
address-family { ipv4 | ipv6 } unicast
4.
bgp dampening [ half-life [ reuse suppress max-suppress-time ] | route-policy route-policy-name ]
5.
commit
6.
show bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics
7.
show bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics regexp regular-expression
8.
show bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] route-policy route-policy-name
9.
show bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] { mask | /prefix-length }}
10.
show bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics { ip-address [{ mask | /prefix-length
} [ longer-prefixes
11.
clear bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics
12.
clear bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics regexp regular-expression
13.
clear bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] route-policy route-policy-name
14.
clear bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics network / mask-length
15.
clear bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] flap-statistics ip-address / mask-length
16.
show bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] dampened-paths
17.
clear bgp [ ipv4 { unicast | multicast | labeled-unicast | all } | ipv6 unicast | all { unicast |
multicast | all | labeled-unicast } | vpnv4 unicast [ rd rd-address ] | vrf { vrf-name | all } [ ipv4
{ unicast | labeled-unicast } | ipv6 unicast ]] dampening ip-address / mask-length
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 91
Implementing BGP
Configuring BGP Route Dampening