Cisco ASR 9000 Series - Page 186

SUMMARY STEPS
1.
configure
2.
route-policypolicy-name
3.
set label mode per-ce
4.
Do one of the following:
•
end
•
commit
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
Enters global configuration mode.
Step 2
route-policypolicy-name
Example:
RP/0/RSP0/CPU0:router(config)# route-policy route1
RP/0/RSP0/CPU0:router(config-rpl)#
Creates a route policy and enters route policy configuration mode.
Step 3
set label mode per-ce
Example:
RP/0/RSP0/CPU0:router(config-rpl)# set label mode per-ce
RP/0/RSP0/CPU0:router(config-rpl)#
Configures resilient per-ce label allocation mode.
Step 4
Do one of the following:
•
end
•
commit
Example:
RP/0/RSP0/CPU0:router(config-rpl)# end
or
RP/0/RSP0/CPU0:router(config-rpl)# commit
Saves configuration changes.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
158 OL-30423-03
Implementing BGP
Configuring Resilient Per-CE Label Allocation Mode