Cisco ASR 9000 Series Configuration Guide

Verifying Networking and Routing Problems 431
Disabling RIB Next-hop Dampening 432
Configuring RCC and LCC 433
Enabling RCC and LCC On-demand Scan 433
Enabling RCC and LCC Background Scan 434
BGP-RIB Feedback Mechanism for Update Generation 436
Configuration Examples for RIB Monitoring 436
Output of show route Command: Example 436
Output of show route backup Command: Example 437
Output of show route best-local Command: Example 437
Output of show route connected Command: Example 437
Output of show route local Command: Example 438
Output of show route longer-prefixes Command: Example 438
Output of show route next-hop Command: Example 438
Enabling RCC and LCC: Example 439
Where to Go Next 439
Additional References 440
CHAPTER 8 Implementing RIP 443
Prerequisites for Implementing RIP 444
Information About Implementing RIP 444
RIP Functional Overview 444
Split Horizon for RIP 445
Route Timers for RIP 445
Route Redistribution for RIP 446
Default Administrative Distances for RIP 446
Routing Policy Options for RIP 447
Authentication Using Keychain in RIP 447
In-bound RIP Traffic on an Interface 448
Out-bound RIP Traffic on an Interface 449
How to Implement RIP 449
Enabling RIP 449
Customizing RIP 451
Control Routing Information 453
Creating a Route Policy for RIP 455
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 xix
Contents

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model