Cisco ASR 9000 Series Configuration Guide

Retain Route-Target 498
Label-Mode 498
Neighbor-ORF 499
Next-hop 499
Clear-Policy 500
Debug 500
BGP Attributes and Operators 501
Default-Information Originate 515
RPL - if prefix is-best-path/is-best-multipath 516
OSPF Policy Attach Points 517
Default-Information Originate 517
Redistribute 517
Area-in 518
Area-out 518
SPF Prefix-priority 519
OSPF Attributes and Operators 519
Distribute-list in 520
OSPFv3 Policy Attach Points 520
Default-Information Originate 521
Redistribute 521
OSPFv3 Attributes and Operators 521
IS-IS Policy Attach Points 522
Redistribute 522
Default-Information Originate 523
Inter-area-propagate 523
IS-IS Attributes and Operators 523
EIGRP Policy Attach Points 524
Default-Accept-In 524
Default-Accept-Out 525
Policy-In 525
Policy-Out 525
If-Policy-In 526
If-Policy-Out 526
Redistribute 526
EIGRP Attributes and Operators 527
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
xxii OL-30423-03
Contents

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model