Cisco ASR 9000 Series Configuration Guide

Where DocumentedIntroduced/Changed in
Release
DescriptionFeature
Implementing BGP
chapter
•
Resilient Per-CE
Label Allocation
Mode, on page 75
•
Configuring
Resilient Per-CE
Label Allocation
Mode Under VRF
Address Family, on
page 16
•
Configuring
Resilient Per-CE
Label Allocation
Mode Using a
Route-Policy, on
page 18
•
Configuring
Resilient Per-CE
Label Allocation
Mode Under VRF
Address Family:
Example, on page
168
•
Configuring
Resilient Per-CE
Label Allocation
Mode Using a
Route-Policy:
Example, on page
168
Refer BGP Commands
chapter in
Cisco ASR 9000 Series
Aggregation Services
Router Routing Command
Reference for information
on the commands used for
configuring Resilient
Per-CE Label Allocation
Mode.
Release 5.1This feature was
introduced.
Resilient Per-CE Label
Allocation Mode
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 5
New and Changed Routing Features
New and Changed Routing Features

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model