Cisco ASR 9000 Series Configuration Guide

PurposeCommand or Action
(Optional) If link-group is configured on the interface, when showing the
IS-IS interface-related topology, this command displays the link-group
and current offset-metric value.
show isis interface
Example:
RP/0/RSP0/CPU0:router# show isis
interface
Step 5
(Optional) Displays the updated metric value.show isis lsp
Example:
RP/0/RSP0/CPU0:router# show isis lsp
Step 6
Configure Link Group Profile: Example
The following is an example configuration, along with the show isis interface output:
router isis 1
is-type level-2-only
net 49.1111.0000.0000.0006.00
link-group foo
metric-offset 100
revert-members 4
minimum-members 2
!
address-family ipv4 unicast
metric-style wide
!
interface GigabitEthernet0/0/0/1
point-to-point
address-family ipv4 unicast
link-group foo
RP/0/RSP0/CPU0:Iguazu#sh isis interface gig 0/0/0/1
Thu Jun 11 14:55:32.565 CEST
GigabitEthernet0/0/0/1 Enabled
Adjacency Formation: Enabled
Prefix Advertisement: Enabled
IPv4 BFD: Disabled
IPv6 BFD: Disabled
BFD Min Interval: 150
BFD Multiplier: 3
Circuit Type: level-2-only (Interface circuit type is level-1-2)
Media Type: P2P
Circuit Number: 0
Extended Circuit Number: 36
Next P2P IIH in: 8 s
LSP Rexmit Queue Size: 0
Level-2
Adjacency Count: 1
LSP Pacing Interval: 33 ms
PSNP Entry Queue Size: 0
CLNS I/O
Protocol State: Up
MTU: 1497
SNPA: 0026.9829.af19
Layer-2 MCast Groups Membership:
All ISs: Yes
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
OL-30423-03 323
Implementing IS-IS
ISIS Link Group

Cisco ASR 9000 Series Specifications

General

Brand	Cisco
Model	ASR 9000 Series
Category	Network Router
Language	English