EasyManuals Logo

Cisco ASR-920-12SZ-IM Hardware Installation Guide

Cisco ASR-920-12SZ-IM
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
DescriptionComponent
Chassis rack-mount brackets (19-inch EIA) with eight
screws
Accessories kit
Two cable guides with two screws
One earth lug with two 10-32 screws
USB Type-A to USB Type-A Male cable
PSU dummy cover (ASR920-PWR-BLANK)
IM dummy cover (ASR900-IMA-BLANK)
One disposable wrist strap (optional)ESD, wrist strap (disposable)
Cisco ASR 920 Series Router Pointer CardDocumentation
Check the container for the following optional equipment:
AC and DC power supplies
The AC and DC power supplies are provided
as ordered.
Note
Power cord if an AC power supply was shipped.
There are no cords for the DC power supply units.
If you do not specify the type of power
cable, US power cable for the AC router
variant is supplied.
Note
Optional equipment
Most Cisco documentation is available online. The Cisco ASR 920 Series Aggregation Services Router Pointer
Card that is shipped with your Cisco ASR 920 Series Router contains links and information about the various
documents that are available online.
Note
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
35
Preparing for Installation
Unpacking and Verifying the Shipped Contents

Table of Contents

Other manuals for Cisco ASR-920-12SZ-IM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR-920-12SZ-IM and is the answer not in the manual?

Cisco ASR-920-12SZ-IM Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Networking standardsIEEE 802.3x
Ethernet LAN data rates10, 100, 1000, 10000 Mbit/s
USB ports quantity2
Ethernet LAN (RJ-45) ports8
Product colorGray
Rack capacity1U
Antenna typeNot supported
AC input voltage100 - 240 V
Power source typeAC, DC, PoE
AC input frequency50 - 60 Hz
Power consumption (typical)130 W
Non-operating altitude0 - 4570 m
Operating temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)5 - 95 %
SafetyUL 60950-1, 2005, CAN/CSA C22.2 No. 60950-1: 2005, IEC 60950-1, 2005, EN 60950-1, 2005, AS/NZS 60950.1:2005
Electromagnetic compatibilityFCC CFR47 Part 15 Class A
Mean time between failures (MTBF)407230 h
Firewall-
Security algorithmsIPSec
Weight and Dimensions IconWeight and Dimensions
Depth286.54 mm
Width444.5 mm
Height44 mm
Weight4830 g

Related product manuals