Cisco ASR-920-12SZ-IM Hardware Installation Guide

Figure 4: Cisco ASR-920-12SZ-IM Router — Dimensions
External Interfaces
The external physical interfaces on the front panel of the router are given below:
Network Interfaces
The network interfaces are provided through fixed ports.
• GE SFP ports—supports 100/1000 modes
• GE Copper RJ-45 ports—supports 10/100/1000 operation. All eight copper RJ-45 ports support
PoE/PoE+/UPoE with overall power budget of 180 W.
PoE is not supported when the system is powered with 24 V DC.Note
• 10GE SFP+—supports 10G/1G mode depending on the SFP+/SFP in the network interface slot.
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
8
Cisco ASR 920 Series Aggregation Services Router Overview
External Interfaces

Cisco ASR-920-12SZ-IM Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Networking standards	IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000, 10000 Mbit/s
USB ports quantity	2
Ethernet LAN (RJ-45) ports	8
Product color	Gray
Rack capacity	1U
Antenna type	Not supported
AC input voltage	100 - 240 V
Power source type	AC, DC, PoE
AC input frequency	50 - 60 Hz
Power consumption (typical)	130 W
Non-operating altitude	0 - 4570 m
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, 2005, CAN/CSA C22.2 No. 60950-1: 2005, IEC 60950-1, 2005, EN 60950-1, 2005, AS/NZS 60950.1:2005
Electromagnetic compatibility	FCC CFR47 Part 15 Class A
Mean time between failures (MTBF)	407230 h
Firewall	-
Security algorithms	IPSec

Weight and Dimensions

Depth	286.54 mm
Width	444.5 mm
Height	44 mm
Weight	4830 g