EasyManuals Logo

Cisco ASR-920-12SZ-IM Hardware Installation Guide

Cisco ASR-920-12SZ-IM
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
CHAPTER 3
Installing the Cisco ASR 920 Series Router
This chapter describes how to install the router and includes the following sections:
Prerequisites, page 3-1
Installing the Router in a Rack, page 3-2
Wall Mounting the Router, page 3-13
Installing and Removing SFP Modules, page 3-16
Connecting to the Copper Ports, page 3-18
Installing the Chassis Ground Connection, page 3-20
Installing and Removing the Fan Tray, page 3-22
Interface Module Installation, page 3-24
Installing the Power Supply, page 3-25
Connecting the Router to the Network, page 3-35
Prerequisites, page 38
Installing the Router in a Rack, page 38
Mounting the Router in a Rack, page 45
Installing the Router Chassis in the Rack, page 46
Attaching the Cable Guides, page 47
Wall Mounting the Router, page 49
Installing and Removing SFP Modules, page 52
Connecting to the Copper Ports, page 55
Installing the Chassis Ground Connection, page 57
Installing and Removing the Fan Tray, page 60
Interface Module Installation, page 63
Installing the Power Supply, page 65
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
37

Table of Contents

Other manuals for Cisco ASR-920-12SZ-IM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR-920-12SZ-IM and is the answer not in the manual?

Cisco ASR-920-12SZ-IM Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Networking standardsIEEE 802.3x
Ethernet LAN data rates10, 100, 1000, 10000 Mbit/s
USB ports quantity2
Ethernet LAN (RJ-45) ports8
Product colorGray
Rack capacity1U
Antenna typeNot supported
AC input voltage100 - 240 V
Power source typeAC, DC, PoE
AC input frequency50 - 60 Hz
Power consumption (typical)130 W
Non-operating altitude0 - 4570 m
Operating temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)5 - 95 %
SafetyUL 60950-1, 2005, CAN/CSA C22.2 No. 60950-1: 2005, IEC 60950-1, 2005, EN 60950-1, 2005, AS/NZS 60950.1:2005
Electromagnetic compatibilityFCC CFR47 Part 15 Class A
Mean time between failures (MTBF)407230 h
Firewall-
Security algorithmsIPSec
Weight and Dimensions IconWeight and Dimensions
Depth286.54 mm
Width444.5 mm
Height44 mm
Weight4830 g

Related product manuals