Cisco ASR-920-12SZ-IM Hardware Installation Guide

CHAPTER 4 Initial Configuration 93
Checking Conditions Prior to System Startup 93
Powering Up the Router 94
Verifying the Front Panel LEDs 94
Verifying the Hardware Configuration 94
Checking Hardware and Software Compatibility 94
Configuring the Router at Startup 95
Accessing the CLI Using the Console 95
Configuring Global Parameters 96
Checking the Running Configuration Settings 97
Saving the Running Configuration to NVRAM 97
Safely Powering Off the Router 97
CHAPTER 5 Troubleshooting 99
Pinouts 99
GPS Port Pinouts 99
Time-of-Day Port Pinouts 100
Alarm Port Pinouts 100
Management GigabitEthernet Port Pinouts 101
USB Console Port Pinouts 101
USB Flash or MEM Port Pinouts 102
Optical Fiber Specifications 102
Alarm Conditions 102
LED Summary 103
Power Supply LEDs 103
Fan Tray LEDs 104
CHAPTER 6 Site Log 105
Cisco ASR-920-12SZ-IM Aggregation Services Router Hardware Installation Guide
vii
Contents

Cisco ASR-920-12SZ-IM Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Networking standards	IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000, 10000 Mbit/s
USB ports quantity	2
Ethernet LAN (RJ-45) ports	8
Product color	Gray
Rack capacity	1U
Antenna type	Not supported
AC input voltage	100 - 240 V
Power source type	AC, DC, PoE
AC input frequency	50 - 60 Hz
Power consumption (typical)	130 W
Non-operating altitude	0 - 4570 m
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Safety	UL 60950-1, 2005, CAN/CSA C22.2 No. 60950-1: 2005, IEC 60950-1, 2005, EN 60950-1, 2005, AS/NZS 60950.1:2005
Electromagnetic compatibility	FCC CFR47 Part 15 Class A
Mean time between failures (MTBF)	407230 h
Firewall	-
Security algorithms	IPSec

Weight and Dimensions

Depth	286.54 mm
Width	444.5 mm
Height	44 mm
Weight	4830 g