Cisco Catalyst 2960-X - Page 407

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip admission auth-proxy-banner http [banner-text | file-path]
4.
end
5.
show running-config
6.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Enables the local banner.
ip admission auth-proxy-banner http [banner-text |
file-path]
Step 3
(Optional) Create a custom banner by entering C
banner-text C (where C is a delimiting character), or
Example:
Switch(config)# ip admission auth-proxy-banner
file-path that indicates a file (for example, a logo or text
file) that appears in the banner.
http C My Switch C
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 5
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 383
Configuring Web-Based Authentication
Configuring a Web-Based Authentication Local Banner