Index
IN-15
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
fallback bridging (continued)
frame forwarding
flooding packets
46-2
forwarding packets 46-2
overview 46-1
protocol, unsupported 46-4
stack changes, effects of 46-3
STP
disabling on an interface
46-10
forward-delay interval 46-9
hello BPDU interval 46-8
interface priority 46-7
keepalive messages 17-2
maximum-idle interval 46-9
path cost 46-7
VLAN-bridge spanning-tree priority 46-6
VLAN-bridge STP 46-2
support for 1-12
SVIs and routed ports 46-2
unsupported protocols 46-4
VLAN-bridge STP 17-11
fastethernet0 port
See Ethernet management port, internal
Fast Uplink Transition Protocol
19-6
features, incompatible 25-11
FIB 38-81
fiber-optic, detecting unidirectional links 28-1
files
basic crashinfo
description
47-21
location 47-21
copying B-5
crashinfo, description 47-21
deleting B-5
displaying the contents of B-8
extended crashinfo
description
47-21
location 47-21
files (continued)
tar
creating
B-7
displaying the contents of B-7
extracting B-8
image file format B-25
file system
displaying available file systems
B-2
displaying file information B-3
local file system names B-1
network file system names B-5
setting the default B-3
filtering
in a VLAN
34-29
IPv6 traffic 35-4, 35-8
non-IP traffic 34-27
show and more command output 2-10
filtering show and more command output 2-10
filters, IP
See ACLs, IP
flash device, number of
B-1
Flex Links
configuration guidelines
20-5
configuring 20-6, 20-7
configuring preferred VLAN 20-9
configuring VLAN load balancing 20-8
default configuration 20-5
description 20-1
link load balancing 20-2
monitoring 20-11
VLANs 20-2
flooded traffic, blocking 25-7
flow-based packet classification 1-10
flowcharts
QoS classification
36-6
QoS egress queueing and scheduling 36-17
QoS ingress queueing and scheduling 36-15
QoS policing and marking 36-10