Index
IN-16
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
flowcontrol
configuring
10-19
described 10-19
forward-delay time
MSTP
18-23
STP 17-23
Forwarding Information Base
See FIB
forwarding nonroutable protocols
46-1
FTP
accessing MIB files
A-4
configuration files
downloading
B-14
overview B-13
preparing the server B-14
uploading B-15
image files
deleting old image
B-33
downloading B-31
preparing the server B-30
uploading B-33
G
get-bulk-request operation 32-3
get-next-request operation 32-3, 32-4
get-request operation 32-3, 32-4
get-response operation 32-3
global configuration mode 2-2
global leave, IGMP 23-13
guest VLAN and IEEE 802.1x 9-13
guide
audience
xliii
purpose of xliii
guide mode 1-3
GUIs
See device manager and Network Assistant
H
hardware limitations and Layer 3 interfaces 10-22
hello time
MSTP
18-22
STP 17-22
help, for the command line 2-3
hierarchical policy maps 36-8
configuration guidelines 36-32
configuring 36-52
described 36-11
history
changing the buffer size
2-6
described 2-6
disabling 2-7
recalling commands 2-6
history table, level and number of syslog messages 31-10
host ports
configuring
15-11
kinds of 15-2
hosts, limit on dynamic ports 12-34
Hot Standby Router Protocol
See HSRP
HP OpenView
1-5
HSRP
authentication string
40-9
command-switch redundancy 1-1, 1-6
configuring 40-4
default configuration 40-5
definition 40-1
guidelines 40-5
monitoring 40-11
object tracking 42-7
overview 40-1
priority 40-7
routing redundancy 1-11
support for ICMP redirect messages 40-11
switch stack considerations 40-4
To Next Page
Loading...
