Cisco Catalyst 3120 - Page 25

Contents
xxv
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Configuring SNMP 32-6
Default SNMP Configuration 32-6
SNMP Configuration Guidelines 32-6
Disabling the SNMP Agent 32-7
Configuring Community Strings 32-8
Configuring SNMP Groups and Users 32-9
Configuring SNMP Notifications 32-11
Setting the Agent Contact and Location Information 32-15
Limiting TFTP Servers Used Through SNMP 32-15
SNMP Examples 32-16
Displaying SNMP Status 32-17
CHAPTER 33 Configuring Embedded Event Manager 33-1
Understanding Embedded Event Manager 33-1
Event Detectors 33-2
Embedded Event Manager Actions 33-4
Embedded Event Manager Policies 33-4
Embedded Event Manager Environment Variables 33-4
Configuring Embedded Event Manager 33-5
Registering and Defining an Embedded Event Manager Applet 33-5
Registering and Defining an Embedded Event Manager TCL Script 33-6
Displaying Embedded Event Manager Information 33-7
CHAPTER 34 Configuring Network Security with ACLs 34-1
Understanding ACLs 34-1
Supported ACLs 34-2
Port ACLs 34-3
Router ACLs 34-4
VLAN Maps 34-5
Handling Fragmented and Unfragmented Traffic 34-5
ACLs and Switch Stacks 34-6
Configuring IPv4 ACLs 34-7
Creating Standard and Extended IPv4 ACLs 34-8
Access List Numbers 34-8
ACL Logging 34-9
Creating a Numbered Standard ACL 34-10
Creating a Numbered Extended ACL 34-11
Resequencing ACEs in an ACL 34-15
Creating Named Standard and Extended ACLs 34-15