Cisco Catalyst 3120 - Page 26

Contents
xxvi
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Using Time Ranges with ACLs 34-17
Including Comments in ACLs 34-19
Applying an IPv4 ACL to a Terminal Line 34-19
Applying an IPv4 ACL to an Interface 34-20
Hardware and Software Treatment of IP ACLs 34-22
IPv4 ACL Configuration Examples 34-22
Numbered ACLs 34-24
Extended ACLs 34-24
Named ACLs 34-25
Time Range Applied to an IP ACL 34-25
Commented IP ACL Entries 34-25
ACL Logging 34-26
Creating Named MAC Extended ACLs 34-27
Applying a MAC ACL to a Layer 2 Interface 34-28
Configuring VLAN Maps 34-29
VLAN Map Configuration Guidelines 34-30
Creating a VLAN Map 34-31
Examples of ACLs and VLAN Maps 34-32
Applying a VLAN Map to a VLAN 34-34
Using VLAN Maps in Your Network 34-34
Denying Access to a Server on Anothera VLAN 34-34
Using VLAN Maps with Router ACLs 34-35
VLAN Maps and Router ACL Configuration Guidelines 34-36
Examples of Router ACLs and VLAN Maps Applied to VLANs 34-37
ACLs and Switched Packets 34-37
ACLs and Bridged Packets 34-37
ACLs and Routed Packets 34-38
ACLs and Multicast Packets 34-39
Displaying IPv4 ACL Configuration 34-39
CHAPTER 35 Configuring IPv6 ACLs 35-1
Understanding IPv6 ACLs 35-2
Supported ACL Features 35-3
IPv6 ACL Limitations 35-3
IPv6 ACLs and Switch Stacks 35-3
Configuring IPv6 ACLs 35-4
Default IPv6 ACL Configuration 35-4
Interaction with Other Features and Switches 35-4