Cisco Catalyst 3120

Contents
xxxi
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Configuring BGP 38-44
Default BGP Configuration 38-46
Nonstop Forwarding Awareness 38-48
Enabling BGP Routing 38-49
Managing Routing Policy Changes 38-51
Configuring BGP Decision Attributes 38-53
Configuring BGP Filtering with Route Maps 38-55
Configuring BGP Filtering by Neighbor 38-55
Configuring Prefix Lists for BGP Filtering 38-57
Configuring BGP Community Filtering 38-58
Configuring BGP Neighbors and Peer Groups 38-59
Configuring Aggregate Addresses 38-61
Configuring Routing Domain Confederations 38-62
Configuring BGP Route Reflectors 38-62
Configuring Route Dampening 38-63
Monitoring and Maintaining BGP 38-64
Configuring Multi-VRF CE 38-65
Understanding Multi-VRF CE 38-66
Default Multi-VRF CE Configuration 38-68
Multi-VRF CE Configuration Guidelines 38-68
Configuring VRFs 38-69
Configuring VRF-Aware Services 38-70
User Interface for ARP 38-70
User Interface for PING 38-71
User Interface for SNMP 38-71
User Interface for HSRP 38-71
User Interface for uRPF 38-72
User Interface for Syslog 38-72
User Interface for Traceroute 38-73
User Interface for FTP and TFTP 38-73
Configuring Multicast VRFs 38-74
Configuring a VPN Routing Session 38-74
Configuring BGP PE to CE Routing Sessions 38-75
Multi-VRF CE Configuration Example 38-76
Displaying Multi-VRF CE Status 38-80
Configuring Unicast Reverse Path Forwarding 38-80
Configuring Protocol-Independent Features 38-81
Configuring Distributed Cisco Express Forwarding 38-81
Configuring the Number of Equal-Cost Routing Paths 38-82