Cisco Catalyst 3120

Contents
xxxiii
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
OL-12247-01
Displaying IPv6 39-24
CHAPTER 40 Configuring HSRP 40-1
Understanding HSRP 40-1
Multiple HSRP 40-3
HSRP and Switch Stacks 40-4
Configuring HSRP 40-4
Default HSRP Configuration 40-5
HSRP Configuration Guidelines 40-5
Enabling HSRP 40-5
Configuring HSRP Priority 40-7
Configuring MHSRP 40-9
Configuring HSRP Authentication and Timers 40-9
Enabling HSRP Support for ICMP Redirect Messages 40-11
Configuring HSRP Groups and Clustering 40-11
Displaying HSRP Configurations 40-11
CHAPTER 41 Configuring Cisco IOS IP SLAs Operations 41-1
Understanding Cisco IOS IP SLAs 41-1
Using Cisco IOS IP SLAs to Measure Network Performance 41-3
IP SLAs Responder and IP SLAs Control Protocol 41-4
Response Time Computation for IP SLAs 41-4
IP SLAs Operation Scheduling 41-5
IP SLAs Operation Threshold Monitoring 41-5
Configuring IP SLAs Operations 41-6
Default Configuration 41-6
Configuration Guidelines 41-6
Configuring the IP SLAs Responder 41-8
Analyzing IP Service Levels by Using the UDP Jitter Operation 41-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 41-11
Monitoring IP SLAs Operations 41-14
CHAPTER 42 Configuring Enhanced Object Tracking 42-1
Understanding Enhanced Object Tracking 42-1
Configuring Enhanced Object Tracking Features 42-2
Default Configuration 42-2
Tracking Interface Line-Protocol or IP Routing State 42-2
Configuring a Tracked List 42-3