Cisco Catalyst 6500 Series Hardware Installation Guide

x
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
OL-9041-04
Preface
Document Revision History
Table 1 records technical changes to this document. The table shows the Cisco IOS software release
number and document revision number for the change, the date of the change, and a brief summary of
the change.
Ta b l e 1 Document Revision History
Release No. Revision Date Change Summary
12.2(33)SXI OL-9041-04 October 31, 2008 The following modifications were made:
• Support was restored for the Cisco 7600
SIP-600.
• Support was restored for the ATM SPAs.
• Support was added for the following SPAs
on the Cisco
7600 SIP-200:
– 2-Port and 4-Port OC-3c/STM-1 ATM
SPA
• Support was added for the following SPAs
on the Cisco
7600 SIP-400:
– 2-Port and 4-Port Clear Channel T3/E3
SPA
– 2-Port and 4-Port Channelized T3 SPA
– 8-Port Channelized T1/E1 SPA
– 2-Port and 4-Port OC-3c/STM-1 ATM
SPA
– 1-Port OC-12c/STM-4 ATM SPA
– 5-Port Gigabit Ethernet SPA (V2)
• Support was added for the following SPAs
on the Cisco
7600 SIP-600:
– 2-Port OC-48 POS/RPR SPA
12.2(33)SXH OL-9041-03 August 20, 2007 The following modifications were made:
• Support was removed for the Cisco 7600
SIP-600.
• Support was removed for the ATM SPAs.
• Support was added for the following SPAs
on the Cisco
7600 SIP-200:
– 1-Port Channelized OC-3/STM-1 SPA
– 4-Port and 8-Port Fast Ethernet SPA
• Support was added for the following SPA
on the Cisco
7600 SIP-400:
– 2-Port Channelized T3 SPA

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English