3-31
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
OL-9041-04
Chapter 3 Catalyst 6500 Series Switch SPA Overview
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview
Figure 3-24 SPA Mate Cables
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA is a single-height SPA that is installed in one SIP
subslot. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA provides SONET and SDH network
connectivity with a bandwidth of 9.95
Gbps.
For more information about SPA bandwidth, see the “Bandwidth Oversubscription” section on page 3-3.
For more information about SPAs and their compatibility with SIPs and modular optics, see the product
overview chapter in this guide.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a 10-Gbps small form-factor pluggable optical
receptacle for each port allowing connection to single-mode optical fiber. For more information on the
optical fiber cables used with this SPA, see the
“OC-3c/STM-1 POS SPA SFP Optical Transceiver
Modules and Cables” section on page 3-16.
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR XFP SPA:
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs, page 3-32
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications, page 3-33
• 1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and
Cables, page 3-33
1 Long length RPR mate cable for single port
RPR SPAs (CBL-RPR-OC192-L)
2 Short length RPR mate cable for single port
RPR SPAs (CAB-RPR-OC192-S)
To Next Page
Loading...
Need help?
General