2-11
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
OL-9041-04
Chapter 2 Catalyst 6500 Series Switch SIPs and SSCs Overview
Cisco 7600-SSC-400 Overview
Cisco 7600-SSC-400 Overview
The following sections describe the SPA services carrier, 7600-SSC-400:
• Cisco 7600 SSC-400 Processor, page 2-11
• Cisco 7600 SSC-400 LED, page 2-11
• Cisco 7600 SSC-400 Physical Specifications, page 2-12
Cisco 7600 SSC-400 Processor
Table 2-13 describes the processor on a 7600-SSC-400.
Cisco 7600 SSC-400 LED
The 7600-SSC-400 has one LED as shown in Figure 2-8.
Figure 2-8 7600-SSC-400 Faceplate
Table 2-14 describes the 7600-SSC-400 LED.
Relative humidity 10 to 90 percent, noncondensing
Storage temperature –4 to 149°F (–20 to 65°C)
Table 2-12 7600-SIP-600 Physical Specifications (continued)
Description Specifications
Ta b l e 2-13 7600-SSC-400 Processor
Type Speed Description
CPU 400 megahertz (MHz) internal operating
frequency
Broadcom 1125 MIPS-based design
STATUS
2
0
3
1
SERVICES
SPA CARRIER
7600-SSC-400
116438
Ta b l e 2-14 7600-SSC-400 LED
LED Label Color State Meaning
STATUS Red On The 7600-SSC-400 has encountered an error.
Green On The 7600-SSC-400 is online.
Yellow On The 7600-SSC-400 is loading.
Off Off The 7600-SSC-400 is powered off.