Cisco Catalyst 6500 Series Hardware Installation Guide

1-5
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
OL-9041-04
Chapter 1 SIP, SSC, and SPA Product Overview
Modular Optics Compatibility
Modular Optics Compatibility
Some SPAs implement small form-factor pluggable (SFP) optical transceivers to provide network
connectivity. An SFP module is a transceiver device that mounts into the front panel to provide network
connectivity.
Cisco Systems qualifies the SFP modules that can be used with SPAs.
Note The SPAs will only accept the SFP modules listed as supported in this document. An SFP check is run
every time an SFP module is inserted into a SPA, and only SFP modules that pass this check will be usable.
Table 1-7 shows the types of optics modules that have been qualified for use with a SPA.
2-Port and 4-Port Channelized T3 SPA SPA-2XCT3/DS0
SPA-4XCT3/DS0
Yes No No No
2-Port and 4-Port Clear Channel T3/E3
SPA
SPA-2XT3/E3
SPA-4XT3/E3
Yes No No No
8-Port Channelized T1/E1 SPA SPA-8XCHT1/E1 Yes No No No
Ta b l e 1-6 SIP, SSC, and SPA Compatibility Table for CEoP SPAs
SPA Product ID SIP Type
Cisco 7600
SIP-200
Cisco 7600
SIP-400
Cisco 7600
SIP-600
Cisco 7600
SSC-400
24-Port Channelized T1/E1 ATM CEoP
SPA
SPA-24CHT1-CE-ATM No Ye s No No
Table 1-5 SIP, SSC, and SPA Compatibility Table for Serial SPAs (continued)
SPA Product ID SIP Type
Ta b l e 1-7 SPA Optics Compatibility
SPA Qualified Optics Modules (Cisco Part Numbers)
2-Port and 4-Port OC-3c/STM-1 ATM SPA • SFP-OC3-MM
• SFP-OC3-SR
• SFP-OC3-IR1
• SFP-OC3-LR1
• SFP-OC3-LR2
1-Port OC-12c/STM-4 ATM SPA • SFP-OC12-MM
• SFP-OC12-SR
• SFP-OC12-IR1
• SFP-OC12-LR1
• SFP-OC12-LR2

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English