Cisco Catalyst 6500 Series Configuration Note

A-4
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Appendix A Configuration Examples
Configuring Bridged Mode with the MSFC on the Client Side
Configuring Bridged Mode with the MSFC on the Client Side
This example provides configuration parameters for configuring bridged mode:
module ContentSwitchingModule 5
vlan 221 client
ip address 10.20.220.2 255.255.255.0
gateway 10.20.220.1
!
vlan 220 server
ip address 10.20.220.2 255.255.255.0
# Two VLANs with the same IP address are bridged together.
!
serverfarm WEBFARM
nat server
no nat client
real 10.20.220.10
inservice
real 10.20.220.20
inservice
real 10.20.220.30
no inservice
!
vserver WEB
virtual 10.20.220.100 tcp www
serverfarm WEBFARM
persistent rebalance
inservice
interface FastEthernet2/2
no ip address
switchport
switchport access vlan 220
# The above is the port that connects to the real servers
interface FastEthernet2/24
ip address 10.20.1.1 255.255.255.0
# The above is the MSFC interface that connects to the client side network
interface Vlan221
ip address 10.20.220.1 255.255.255.0
# The above is the MSFC interface for the internal VLAN used
# for MSFC-CSM communication.
# The servers use this IP address as their default gateway
# since the CSM is bridging between the client and server VLANs
Output of show commands:
Cat6k-2# show mod csm 5 arp
Internet Address Physical Interface VLAN Type Status
--------------------------------------------------------------------
10.20.220.1 00-02-FC-CB-70-0A 221 GATEWAY up(0 misses)
10.20.220.2 00-02-FC-E1-68-EC 221/220 --SLB-- local
10.20.220.10 00-D0-B7-A0-81-D8 220 REAL up(0 misses)
10.20.220.20 00-D0-B7-A0-81-D8 220 REAL up(0 misses)
10.20.220.30 00-D0-B7-A0-81-D8 220 REAL up(0 misses)
10.20.220.100 00-02-FC-E1-68-EB 0 VSERVER local

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English