Cisco Catalyst 6500 Series Configuration Note

6-15
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Chapter 6 Configuring Virtual Servers, Maps, and Policies
Configuring Generic Header Parsing
Assigning the Policy to a Virtual Server
In virtual server submode, specify the name of the policy that has the header map assigned, using the
vserver virtserver-name command.
To specify a policy with a header map assigned, perform this task:
Generic Header Parsing Example
This example shows how to configure generic header parsing:
Router(config)# mod csm 2
Router(config-module-csm)# !!!configure generic header map
Router(config-module-csm)# map map2 header
Router(config-slb-map-heaer)# $col http header Host header-value *.yahoo.com
Router(config-slb-map-header)# !!! configure serverfarm
Router(config-slb-map-header)# serverfarm farm2
Router(config-slb-sfarm)# real 10.1.0.105
Router(config-slb-real)# inservice
Router(config-slb-real)# exit
Router(config-slb-sfarm)# exit
Router(config-module-csm)# !!! configurate policy
Router(config-module-csm)# policy pc2
Router(config-slb-policy)# serverfarm farm2
Router(config-slb-policy)# header-map map2
Router(config-slb-policy)# exit
Router(config-module-csm)# !!! config vserver
Router(config-module-csm)# vserver vs2
Router(config-slb-vserver)# virtual 10.1.0.82 tcp 80
Router(config-slb-vserver)# slb-policy pc2
Router(config-slb-vserver)# inservice
Router(config-slb-vserver)# end
Router(config)# show module csm 2 map det
Command Purpose
Step 1
Router(config-module-csm)#
vserver virtserver-
name
Configures a virtual server.
Step 2
Router(config-slb-policy)#
header-map
name
Assigns an HTTP header map to a policy.

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English