Cisco Catalyst 6500 Series - Configuring Session Persistence (Stickiness

A-9
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Appendix A Configuration Examples
Configuring Session Persistence (Stickiness)
Configuring Session Persistence (Stickiness)
This example provides configuration parameters for configuring session persistence or stickiness:
module ContentSwitchingModule 5
vlan 220 server
ip address 10.20.220.2 255.255.255.0
alias 10.20.220.1 255.255.255.0
!
vlan 221 client
ip address 10.20.221.5 255.255.255.0
gateway 10.20.221.1
!
serverfarm WEBFARM
nat server
no nat client
real 10.20.220.10
inservice
real 10.20.220.20
inservice
real 10.20.220.30
inservice
!
sticky 10 netmask 255.255.255.255 timeout 20
!
sticky 20 cookie yourname timeout 30
!
vserver TELNET
virtual 10.20.221.100 tcp telnet
serverfarm WEBFARM
persistent rebalance
inservice
!
vserver WEB1
virtual 10.20.221.101 tcp www
serverfarm WEBFARM
sticky 20 group 10
persistent rebalance
inservice
!
vserver WEB2
virtual 10.20.221.102 tcp www
serverfarm WEBFARM
sticky 30 group 20
persistent rebalance
inservice
!
Output of show commands:
Cat6k-2# show mod csm 5 sticky group 10
group sticky-data real timeout
----------------------------------------------------------------
10 ip 10.20.1.100 10.20.220.10 793
Cat6k-2#show mod csm 5 sticky group 20
group sticky-data real timeout
----------------------------------------------------------------
20 cookie 4C656B72:861F0395 10.20.220.20 1597