EasyManuals Logo

Cisco Catalyst 6500 Series Configuration Note

Cisco Catalyst 6500 Series
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
A-15
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Appendix A Configuration Examples
Route Health Injection
# The static route to 10.20.250.100 has been automatically created by the CSM, since both
# servers were healthy.
C 10.20.221.0/24 is directly connected, Vlan221
S* 0.0.0.0/0 [1/0] via 10.30.1.100
Cat6k-2# sh mod csm 5 vser deta
WEB, type = SLB, state = OPERATIONAL, v_index = 14
virtual = 10.20.250.100/32:80 bidir, TCP, service = NONE, advertise = TRUE
idle = 3600, replicate csrp = none, vlan = 221, pending = 30, layer 4
max parse len = 2000, persist rebalance = TRUE
ssl sticky offset = 0, length = 32
conns = 0, total conns = 6
Default policy:
server farm = WEBFARM, backup = <not assigned>
sticky: timer = 0, subnet = 0.0.0.0, group id = 0
Policy Tot matches Client pkts Server pkts
-----------------------------------------------------
(default) 6 36 30
# Failing the servers causes the route to be removed This behaviour is configured with the
# advertise active command.
Cat6k-2# sh mod csm 5 probe detail
1d20h: %SYS-5-CONFIG_I: Configured from console by vty0 (probe detail
probe type port interval retries failed open receive
---------------------------------------------------------------------
PING icmp 2 2 10 2
real vserver serverfarm policy status
------------------------------------------------------------------------------
10.20.220.20:80 WEB WEBFARM (default) TESTING
10.20.220.10:80 WEB WEBFARM (default) TESTING
Cat6k-2#
1d20h: %CSM_SLB-6-RSERVERSTATE: Module 5 server state changed: SLB-NETMGT: ICMP health
probe failed for server 10.20.220.20:80 in serverfarm 'WEBFARM'
1d20h: %CSM_SLB-6-RSERVERSTATE: Module 5 server state changed: SLB-NETMGT: ICMP health
probe failed for server 10.20.220.10:80 in serverfarm 'WEBFARM'
\Cat6k-2#
Cat6k-2# sh mod csm 5 probe detail
probe type port interval retries failed open receive
---------------------------------------------------------------------
PING icmp 2 2 10 2
real vserver serverfarm policy status
------------------------------------------------------------------------------
10.20.220.20:80 WEB WEBFARM (default) FAILED
10.20.220.10:80 WEB WEBFARM (default) FAILED
Cat6k-2#
Cat6k-2# sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 10.20.1.100 to network 0.0.0.0
10.0.0.0/8 is variably subnetted, 8 subnets, 3 masks
C 10.21.1.0/24 is directly connected, Vlan21
C 10.20.221.0/24 is directly connected, Vlan221
S* 0.0.0.0/0 [1/0] via 10.30.1.100

Table of Contents

Other manuals for Cisco Catalyst 6500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 6500 Series and is the answer not in the manual?

Cisco Catalyst 6500 Series Specifications

General IconGeneral
BrandCisco
ModelCatalyst 6500 Series
CategorySwitch
LanguageEnglish

Related product manuals