Cisco Catalyst 6500 Series Configuration Note

A-19
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Appendix A Configuration Examples
Backup Server Farm
receive 2
!
real SERVER1
address 10.20.220.10
inservice
real SERVER2
address 10.20.220.20
inservice
real SERVER3
address 10.20.210.30
inservice
real SERVER4
address 10.20.210.40
inservice
!
serverfarm WEBFARM
nat server
no nat client
real name SERVER1
inservice
real name SERVER2
inservice
probe PING
!
serverfarm WEBFARM2
nat server
no nat client
real name SERVER3
inservice
real name SERVER4
inservice
probe PING
!
vserver WEB
virtual 10.20.221.100 tcp www
serverfarm WEBFARM backup WEBFARM2
persistent rebalance
inservice
!
Output of some show commands:
Cat6k-2# show mod csm 5 real
real server farm weight state conns/hits
-------------------------------------------------------------------------
SERVER1 WEBFARM 8 OPERATIONAL 0
SERVER2 WEBFARM 8 OPERATIONAL 0
SERVER3 WEBFARM2 8 OPERATIONAL 0
SERVER4 WEBFARM2 8 OPERATIONAL 0
# All the servers are shown as operational.
Cat6k-2# show mod csm 5 serverfarm detail
WEBFARM, type = SLB, predictor = RoundRobin
nat = SERVER
virtuals inservice = 1, reals = 2, bind id = 0, fail action = none
inband health config: <none>
retcode map = <none>
Probes:
PING, type = icmp
Real servers:
SERVER1, weight = 8, OPERATIONAL, conns = 0
SERVER2, weight = 8, OPERATIONAL, conns = 0
Total connections = 0

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English