Cisco Catalyst 6500 Series - Page 177

A-23
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Appendix A Configuration Examples
Backup Server Farm
# The virtual server is now shown as operational.
Cat6k-2# sh mod csm 5 real detail
SERVER1, WEBFARM, state = PROBE_FAILED
address = 10.20.220.10, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 7, total conn failures = 0
SERVER2, WEBFARM, state = FAILED
address = 10.20.220.20, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 7, total conn failures = 0
SERVER3, WEBFARM2, state = OPERATIONAL
address = 10.20.210.30, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 0, total conn failures = 0
SERVER4, WEBFARM2, state = OPERATIONAL
address = 10.20.210.40, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 0, total conn failures = 0
Cat6k-2#
1d21h: %CSM_SLB-6-RSERVERSTATE: Module 5 server state changed: SLB-NETMGT: Server
10.20.220.10 failed ARP request
# The ARP entry for the other server has been refreshed.
Cat6k-2# sh mod csm 5 real detail
SERVER1, WEBFARM, state = FAILED
address = 10.20.220.10, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 7, total conn failures = 0
SERVER2, WEBFARM, state = FAILED
address = 10.20.220.20, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 7, total conn failures = 0
SERVER3, WEBFARM2, state = OPERATIONAL
address = 10.20.210.30, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 0, total conn failures = 0
SERVER4, WEBFARM2, state = OPERATIONAL
address = 10.20.210.40, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 0, total conn failures = 0
# So far, each of the servers in the primary server farm have received 7 connections. New
# connections are now sent only to the backup server farm.
Cat6k-2# sh mod csm 5 real detail
SERVER1, WEBFARM, state = FAILED
address = 10.20.220.10, location = <NA>
conns = 0, maxconns = 4294967295, minconns = 0
weight = 8, weight(admin) = 8, metric = 0, remainder = 0
total conns established = 7, total conn failures = 0
SERVER2, WEBFARM, state = FAILED
address = 10.20.220.20, location = <NA>