Cisco Catalyst 6500 Series Configuration Note

B-2
Catalyst 6500 Series Content Switching Module Configuration Note
OL-4612-01
Appendix B Troubleshooting and System Messages
System Messages
Error Message CSM_SLB-3-OUTOFMEM Module [dec] memory error
Explanation
This a general memory problem of the control module. The memory problem may lead
to more serious operational problem in the CSM if it persists.
Recommended Action Run a memory check, or increase the memory size.
Error Message CSM_SLB-3-PORTCHANNEL Portchannel allocation failed for module [dec]
Explanation This problem occurs when there are more CSM modules inserted into the chassis than
configured or the slot number where the module was inserted was higher than anticipated.
Recommended Action Move the CSM module to a lower slot number to resolve the problem.
Error Message CSM_SLB-3-RELOAD Module [dec] configuration reload failed
Explanation
The MSFC could not reload the existing configuration into the CSM module that came
online. The cause of the problem may be the CLI error checking of the CSM.
Recommended Action Check the status of the CSM module such as diagnostic failure or version
mismatch.
Error Message CSM_SLB-3-UNEXPECTED Module [dec] unexpected error
CSM_SLB-3-REDUNDANCY Module [dec] FT error
CSM_SLB-4-REDUNDANCY_WARN Module [dec] FT warning
CSM_SLB-6-REDUNDANCY_INFO Module %d FT info
CSM_SLB-3-ERROR Module [dec] error
CSM_SLB-4-WARNING Module [dec] warning
CSM_SLB-6-INFO Module [dec] info
Explanation
These messages are generic headlines for error or warning messages. Additional details
are located in the information string.
Recommended Action None.
Error Message CSM_SLB-3-VERMISMATCH Module [dec] image version mismatch
Explanation
This is a version mismatch between MFSC and the CSM code. This condition only
occurs with the MFSC software versions before the 12.1(8)EX release or CSM software versions
before the 2.1(1) release.
Recommended Action Upgrade or downgrade the MFSC version to match the CSM version to allow
the CSM to come online.
Error Message CSM_SLB-4-ARPCONFIG Module [dec] ARP configuration error
Explanation
There is an error in creating or removing static ARP configuration.
Recommended Action Recheck your ARP configuration.

Cisco Catalyst 6500 Series Specifications

General

Brand	Cisco
Model	Catalyst 6500 Series
Category	Switch
Language	English