the ports do not automatically get assigned to that VSAN. You must explicitly reconfigure the port
VSAN membership (see the figure below).
Figure 30: VSAN Port Membership Details
•
VSAN-based runtime (name server), zoning, and configuration (static routes) information is removed
when the VSAN is deleted.
•
Configured VSAN interface information is removed when the VSAN is deleted.
The allowed VSAN list is not affected when a VSAN is deleted.Note
Any commands for a nonconfigured VSAN are rejected. For example, if VSAN 10 is not configured in the
system, a command request to move a port to VSAN 10 is rejected.
Related Topics
Configuring VSAN Trunking, on page 85
Deleting Static VSANs
You can delete a VSAN and its various attributes.
SUMMARY STEPS
1.
configure terminal
2.
vsan database
3.
vsan vsan-id
4.
switch(config-vsan-db)# no vsanvsan-id
5.
switch(config-vsan-db)# end
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 125
Configuring and Managing VSANs
Guidelines and Limitations for VSANs
To Next Page
Loading...
