PurposeCommand or Action
Disables the flow counter.
no fcflow stats aggregated index value vsan vsan-id
Example:
switch(config)# no fcflow stats aggregated index 11
vsan 200
Step 3
Clearing FIB Statistics
Use the clear fcflow stats command to clear the aggregated flow counter:
switch# clear fcflow stats aggregated index 1
The following example shows how to clear the flow counters for source and destination FC IDs:
switch# clear fcflow stats index 1
Displaying Flow Statistics
Use the show fcflow stats commands to view flow statistics:
switch# show fcflow stats aggregated
Idx VSAN frames
---------- ---------- ----------
6 1 42871
The following example shows how to display flow statistics:
switch# show fcflow stats
The following example shows how to display flow index usage:
switch# show fcflow stats usage
2 flows configured
Configured flows : 3,7
The following example shows how to display global FSPF information for a specific VSAN:
switch# show fspf vsan 1
The following example shows how to display a summary of the FSPF database for a specified VSAN. If no
additional parameters are specified, all LSRs in the database are displayed:
switch# show fspf database vsan 1
The following example shows how to display FSPF interface information:
switch# show fspf vsan 1 interface fc2/1
Default Settings for FSFP
The following table lists the default settings for FSPF features.
Table 26: Default FSPF Settings
DefaultParameters
Enabled on all E ports and TE portsFSPF
DynamicSPF computation
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
198 OL-27583-01
Configuring Fibre Channel Routing Services and Protocols
Default Settings for FSFP
To Next Page
Loading...
