Cisco Nexus 5000 Series - Enabling or Disabling FSPF; Clearing FSPF Counters for the VSAN

PurposeCommand or Action
Deletes the FSPF configuration for the specified
VSAN.
no fspf config vsan vsan-id
Example:
switch(config)# no fspf config vsan 24
Step 2
Enabling or Disabling FSPF
You can enable or disable FSPF routing protocols.
SUMMARY STEPS
1.
configure terminal
2.
fspf enable vsan vsan-id
3.
no fspf enable vsan vsan-id
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
switch# configure terminal
switch(config)#
Step 1
Enables the FSPF routing protocol in the specified
VSAN.
fspf enable vsan vsan-id
Example:
switch(config)# fspf enable vsan 567
Step 2
Disables the FSPF routing protocol in the specified
VSAN.
no fspf enable vsan vsan-id
Example:
switch(config)# no fspf enable vsan 567
Step 3
Clearing FSPF Counters for the VSAN
You can clear the FSPF statistics counters for the entire VSAN.
SUMMARY STEPS
1.
clear fspf counters vsan vsan-id
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
184 OL-27583-01
Configuring Fibre Channel Routing Services and Protocols
FSPF Global Configuration