Cisco Nexus 5000 Series - Creating Zone Sets and Adding Member Zones

member interface type slot/port
Local sWWN interface
member interface type slot/port domain-id
domain-id
Domain ID interface
member interface type slot/port swwn swwn-id
Remote sWWN interface
member pwwn pwwn-id
pWWN
The following example shows how to configure different types of member alias:
switch(config)# fcalias name AliasSample vsan 3
pWWN example:
switch(config-fcalias)# member pwwn 10:00:00:23:45:67:89:ab
fWWN example:
switch(config-fcalias)# member fwwn 10:01:10:01:10:ab:cd:ef
FC ID example:
switch(config-fcalias)# member fcid 0x222222
Domain ID example:
switch(config-fcalias)# member domain-id 2 portnumber 23
Local sWWN interface example:
switch(config-fcalias)# member interface fc 2/1
Remote sWWN interface example:
switch(config-fcalias)# member interface fc 2/1 swwn 20:00:00:05:30:00:4a:de
Domain ID interface example:
switch(config-fcalias)# member interface fc2/1 domain-id 25
Device alias example:
switch(config-fcalias)# member device-alias devName
Creating Zone Sets and Adding Member Zones
You can create a zone set to include several zones.
SUMMARY STEPS
1.
configure terminal
2.
zone set name zoneset-name vsan vsan-id
3.
member name
4.
zone name zone-name
5.
member fcid fcid
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 143
Configuring and Managing Zones
Zone Sets