Cisco SAN switches support authentication features to address physical security (see the following figure).
Figure 41: Switch and Host Authentication
Fibre Channel host bus adapters (HBAs) with appropriate firmware and drivers are required for host-switch
authentication.
Note
Configuring DHCHAP Authentication
You can configure DHCHAP authentication using the local password database.
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
240 OL-27583-01
Configuring FC-SP and DHCHAP
Configuring DHCHAP Authentication
To Next Page
Loading...
