Cisco Nexus 5000 Series - Page 255

Software
BIOS: version 1.2.0
loader: version N/A
kickstart: version 4.0(1a)N1(1)
system: version 4.0(1a)N1(1)
BIOS compile time: 06/19/08
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.0.1a.N1.latest.bin
kickstart compile time: 11/25/2008 6:00:00 [11/25/2008 14:17:12]
system image file is: bootflash:/n5000-uk9.4.0.1a.N1.latest.bin
system compile time: 11/25/2008 6:00:00 [11/25/2008 14:59:49]
Hardware
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
Intel(R) Celeron(R) M CPU with 2074308 kB of memory.
Processor Board ID JAB120900PJ
Device name: switch
bootflash: 1003520 kB
Kernel uptime is 0 day(s), 1 hour(s), 29 minute(s), 55 second(s)
Last reset at 510130 usecs after Wed Nov 26 18:12:23 2008
Reason: Reset Requested by CLI command reload
System version: 4.0(1a)N1(1)
Service:
plugin
Core Plugin, Ethernet Plugin
Step 2
Verify if the interface states are as required by your configuration.
Example:
switch# show interface brief
-------------------------------------------------------------------------------
Interface Vsan Admin Admin Status SFP Oper Oper Port
Mode Trunk Mode Speed Channel
Mode (Gbps)
-------------------------------------------------------------------------------
fc3/1 1 E on trunking swl TE 2 --
fc3/2 1 auto on sfpAbsent -- -- --
fc3/3 1 E on trunking swl TE 2 --
fc3/4 1 auto on sfpAbsent -- -- --
fc3/5 1 auto auto notConnected swl -- --
fc3/6 1 auto on sfpAbsent -- -- --
fc3/7 1 auto auto sfpAbsent -- -- --
fc3/8 1 auto auto sfpAbsent -- -- --
Step 3
Verify if you are running the desired configuration.
Example:
switch# show running-config
Building Configuration...
interface fc2/1
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 233
Advanced Fibre Channel Features
Switch Interoperability