Cisco Nexus 5000 Series - Page 285

•
A nWWN (N3) is allowed access through any interface.
•
A pWWN (P3) is allowed access through interface fc2/4 (F4).
•
A sWWN (S1) is allowed access through interface fc3/1-3 (F10 to F13).
•
A pWWN (P10) is allowed access through interface vfc4/1 (F11).
The following table summarizes the port security authorization results for this active database.
Table 34: Authorization Results for Scenario
ReasonConditionAuthorizationDevice Connection
Request
No conflict.1PermittedP1, N2, F1
No conflict.1PermittedP2, N2, F1
F1 is bound to P1/P2.2DeniedP3, N2, F1
Wildcard match for N3.6PermittedP1, N3, F1
Wildcard match for F3.5PermittedP1, N1, F3
P1 is bound to F1.2DeniedP1, N4, F5
N1 is only allowed on F2.2DeniedP5, N1, F5
No conflict.1PermittedP3, N3, F4
No conflict.1PermittedS1, F10
P10 is bound to F11.7DeniedS2, F11
No conflict.3PermittedP4, N4, F5 (auto-learning
on)
No match.4DeniedP4, N4, F5 (auto-learning
off)
No conflict.3PermittedS3, F5 (auto-learning on)
No match.4DeniedS3, F5 (auto-learning off)
P1 is bound to F1.2DeniedP1, N1, F6 (auto-learning
on)
Only P1 and P2 bound to
F1.
7DeniedP5, N5, F1 (auto-learning
on)
P3 paired with F4.7DeniedS3, F4 (auto-learning on)
Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide, Release 5.2(1)N1(1)
OL-27583-01 263
Configuring Port Security
Auto-Learning